Click image to view full size image
Carbon fiber PTFE 20mm Shock Absorber Piston ring for Motorbike front shocks
Specifications:
| Physical performance for shock piston | tensile strength | More than 18MPa |
| elongation @ break | More than 160% | |
| shore hardness (bands) | 57 - 61 | |
| density | 2.06 – 2.19 g/cm3 | |
| wear | Less than 50mg | |
| friction coefficient | Less than 0.2 | |
| hardness (sinter piston) | HRB60-80 | |
| Technical requirements for sinter piston | Raw material F50 - U3 - 66 or FC - 0208 | |
| Steam treatment | ||
| OD tested by digital air gauge | ||
Description:
Filled PTFE Suspension Piston banded piston produced by skirting machine apply in automotives front
shock absorber
Xia Yi is specialized in producing shock absorber pistons, PTFE piston rings and related powder metal parts. We have set up appearance control standard.
Pistons are used in front or rear shock absorbers from different automotives or motorcycles
Spec.: D20xD8X12.5
Filled PTFE banded piston
Unique oil holes design
We produce automatic banding machine by ourselves and we have related testing equipment such as
projector, analytical balance, friction-abrasion testing machine, blow-off testing machine, friction testing
machine and so on.We can test most of properties in our company and others we can’t test we will send
the standard sample blocks to Shanghai Plastics Research Institute.
Applications:
Car or motorbike shock absorbers
Competitive Advantage:
Unique material for shock piston bands
Pistons are produced by automatic banding machine can assure the consistency of the size
Complete testing equipment
Picture show:
Carbon fiber PTFE 20mm Shock Absorber Piston ring for Motorbike front shocks
